This is part of a series of videos for U2 / The Edge fans to show how to achieve some tones with the Kemper Profiling Amplifier.
“Sunday Bloody Sunday“ Live Version AUDIO track
What you are listen to is only the Kemper Amp directly in the PC Audio Interface without any additional effect and/or post-processing. Video recorded LIVE with a Canon camera.
- VIDEO Take here:
- GEAR USED
Telecaster Warmoth Bridge Pickup.
Recorded LIVE with a Canon for the Video and the SW Sequoia on the PC with an MBOX3 Audio Interface.
Kemper Rig with: Gate + Compressor + Studio Equalizer + Vox AC30 Top Boost + 8-Band Graphic Equalizer (Mid Boost) + Stereo Widener + Delay (50 ms; 64% Mix; 35% Feedback with Low Modulation) + Small Room Reverb
- Here you can download the Kemper RIGs:
For the Kemper Rig I used a Commercial Profile: VOX AC30 TAF Pack2 ‘A-Topboost Bee+’.
You can buy this profile here: The Amp Factory Pack 2
Substitute only the Amp of my Rig (click below to download) with the Commercial one and use these settings (Gain 5.4 Def 6.1 PowSag 3.8 Com 2 Clar 6.5 DiMix 1.4). The same information/settings are reported in the Rig on the various Tags of the temporary Amp inserted in the Rig (so you can easily download my Rig and read all from Rig Manager).
U2 SundayBloody-T1 – [Kemper Rig (change Amp!]
- Backing Track here:
U2 – Sunday Bloody Sunday BackingTrack Bbmin
U2 – Sunday Bloody Sunday BackingTrack Bmin
- TAB & CHORDS used here:
U2 – Sunday Bloody Sunday [MAU]
See you next one…
I do not own these song. This demo is only a tribute to U2 and The Edge and examples of sound building with digital modelers.
ANY COPYRIGHTED MATERIAL IS USED UNDER THE GUIDELINES OF “FAIR USE”. SUCH MATERIAL REMAINS THE COPYRIGHT OF THE ORIGINAL HOLDER AND IS USED HERE ONLY FOR THE PURPOSES OF EDUCATION, COMPARISON, AND CRITICISM ONLY. NO INFRINGEMENT OF COPYRIGHT IS INTENDED.